Wednesday, 3 August 2016

Specifikasi Motherboard

Motherboard GA-X99M-GAMING 5( REV.1.1)



CPU
  1. Support for Intel® Core™ i7 processors in the LGA2011-3 package
  2. L3 cache varies with CPU
(Please refer "CPU Support List" for more information.)
Chipset
  1. Intel® X99 Express Chipset
Memory
  1. 4 x DDR4 DIMM sockets supporting up to 64 GB of system memory
    * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
  2. 4 channel memory architecture
  3. Support for DDR4 2800(O.C.) / 2666(O.C.) / 2400(O.C.) / 2133 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules
  6. Support for RDIMM 1Rx8 memory modules (operate in non-ECC mode)
(Please refer "Memory Support List" for more information.)
Audio
  1. Realtek® ALC1150 codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for S/PDIF Out
LAN
  1. Killer E2400 chip (10/100/1000 Mbit)
Expansion Slots
  1. 2 x PCI Express x16 slots, running at x16 (PCIE_1/PCIE_2)
    * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIE_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIE_1 and PCIE_2 slots.


  1. 1 x PCI Express x16 slot, running at x8 (PCIE_3)
    * When an i7-5820K CPU is installed, the PCIE_2 slot operates at up to x8 mode and the PCIE_3 operates at up to x4 mode.
    (All PCI Express x16 slots conform to PCI Express 3.0 standard.)


  1. 1 x PCI Express x1 slot
    (The PCI Express x1 slot conforms to PCI Express 2.0 standard.)


  1. 1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)
Multi-Graphics Technology
  1. Support for NVIDIA® Quad-GPU SLI™ and 2-Way NVIDIA® SLI™ technologies
  2. Support for AMD Quad-GPU CrossFireX™ and 2-Way AMD CrossFire™ technologies
Storage Interface
Chipset:
  1. 1 x M.2 PCIe connector
    (Socket 3, M key, type 2260/2280 SATA & PCIe x2/x1 SSD support)
  2. 1 x SATA Express connector
  3. 6 x SATA 6Gb/s connectors (SATA3 0~5)
  4. Support for RAID 0, RAID 1, RAID 5, and RAID 10
    * Only AHCI mode is supported when an M.2 PCIe SSD or a SATA Express device is installed.
    (M2_10G, SATA Express, and SATA3 4/5 connectors can only be used one at a time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is installed in the M2_10G connector.)
Chipset:
  1. 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only
    (An operating system installed on the SATA3 0~5 ports cannot be used on the sSATA3 0~3 ports.)
USB
Chipset:
  1. 4 x USB 3.0/2.0 ports (available through the internal USB headers)
  2. 10 x USB 2.0/1.1 ports (6 ports on the back panel, 4 ports available through the internal USB headers)
Chipset + Renesas® USB 3.0 Hub:
  1. 4 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 1 x M.2 Socket 3 connector
  4. 1 x SATA Express connector
  5. 10 x SATA 6Gb/s connectors
  6. 1 x CPU fan header
  7. 1 x water cooling fan header (CPU_OPT)
  8. 3 x system fan headers
  9. 1 x front panel header
  10. 1 x front panel audio header
  11. 1 x S/PDIF Out header
  12. 2 x USB 3.0/2.0 headers
  13. 2 x USB 2.0/1.1 headers
  14. 1 x Clear CMOS jumper
  15. 1 x power button
  16. 1 x reset button
  17. 1 x Clear CMOS button
  18. 1 x audio gain control switch
  19. 2 x BIOS switches
Back Panel Connectors
  1. 1 x PS/2 keyboard port
  2. 1 x PS/2 mouse port
  3. 4 x USB 3.0/2.0 ports
  4. 6 x USB 2.0/1.1 ports
  5. 1 x RJ-45 port
  6. 1 x optical S/PDIF Out connector
  7. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
  8. 2 x Wi-Fi antenna connector holes
I/O Controller
  1. iTE® I/O Controller Chip
H/W Monitoring
  1. System voltage detection
  2. CPU/System/Chipset temperature detection
  3. CPU/CPU OPT/System fan speed detection
  4. CPU/System/Chipset overheating warning
  5. CPU/CPU OPT/System fan fail warning
  6. CPU/CPU OPT/System fan speed control
    * Whether the fan speed control function is supported will depend on the cooler you install.
BIOS
  1. 2 x 128 Mbit flash
  2. Use of licensed AMI UEFI BIOS
  3. Support for DualBIOS™
  4. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features
  1. Support for APP Center
    * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications.
    @BIOS
    Ambient LED
    EasyTune
    EZ Setup
    Fast Boot
    Game Controller
    Cloud Station
    ON/OFF Charge
    Smart TimeLock
    Smart Recovery 2
    System Information Viewer
    USB Blocker
    V-Tuner
  2. Support for Q-Flash
  3. Support for Smart Switch
  4. Support for Xpress Install
Bundle Software
  1. Norton® Internet Security (OEM version)
  2. Intel® Smart Response Technology
Operating System
  1. Support for Windows 10/8.1/8/7
Form Factor
  1. Micro-ATX Form Factor; 24.4cm x 24.4cm
Remark
  1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
  2. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website.



Posted by at No comments:

Faktor-Faktor Yang Perlu Dipertimbangkan Sebelum Menaik Taraf Power Supply

1.Power Supply Rosak
2.Power Supply tidak dapat membekalkan kuasa yang secukupnya kepada PC
3.Kabel Power Supply luka atau bocor
Posted by at No comments:

Jenis-Jenis Power Supply

1. COOLER MASTER GX750W
















ModelRS-460-PSAR-J3
RS-460-PSAP-J3
TypeIntel Form Factor ATX 12V V2.31
Dimension (W x L x H)150 x 140 x 86 mm
5.9 x 5.5 x 3.4 inch
Input Voltage110-264Vac (Auto Range)
Input Current10A@115Vac, 6@230Vac
Input Frequency Range47-63Hz
PFCActive PFC (>0.9)
Power Good Signal100~500ms
Hold Up Time>17ms
Efficiency85% typical
MTBF>90,000 hours
ProtectionOVP / UVP / OPP / OTP / SCP
Output Capacity750W
Max. Output Capacity900W
Operation Temperature0~40°C (Nominal Input Voltage)
RegulatoryGOST / C-tick / CCC / KCC
Fan120mm
CertificationsSLI / 80 PLUS
ConnectorM/B +4 Pin MB x 1
4+4 Pin CPU
6+2 Pin PCI x 4
SATA x 9
4 Pin Peripherial x 3
4 Pin Floppy x 1
6 Pin PCI-e Connector X1

                                         
2.COOLER MASTER 460W ELITE POWER PSU














ModelRS-460-PSAR-J3
RS-460-PSAP-J3
TypeIntel Form Factor ATX 12V V2.3
Dimension (W x L x H)150 x 140 x 86 mm
Input Voltage110~120V / 220~240V
Input Current
RS-460-PSAR-J3 : 8.5A @ 115Vac / 5A @ 220Vac
RS-460-PSAP-J3 : 6.3A @ 220Vac
Input Frequency Range47 ~ 63 Hz
PFCNone PFC: RS-460-PSAR-J3
Passive PFC: RS-460-PSAP-J3
Power Good Signal100 ~ 500 ms
Hold Up Time>17 ms
Efficiency>70% Typically
MTBF>100,000 hrs
ProtectionOVP / OCP / OPP / SCP
Output Capacity460 Watts
Operation Temperature0~40°C(Nominal Input Voltage)
RegulatoryCE / GOST / C-tick / UL
Fan120mm fan
ConnectorM/B 20+4 Pin x 1
CPU 4+4 Pin x 1
4 Pin Peripheral x 3
SATA x 4
4 Pin Floppy x 1
6 Pin PCI-e Connector x 1




3.COOLER MASTER 500W ELITE V2 PSU







Model
RS500-PCARN1
Type
Intel Form Factor ATX 12V V2.3
Dimension (W x L x H)
150 x 140 x 86mm / 5.9 x 5.5 x 3.4 inch
Input Voltage
115/230Vac
Input Range
Select Switch
Input Frequency Range
60/50 Hz
Power Good Signal
100-500ms
Hold Up Time
>16ms
Efficiency
75% Typically
MTBF
>100,000 Hours
Protection
OVP/UVP/OPP/OCP/SCP
Output Capacity
500W
Operation Temperature
0~40°C
Regulatory
FCC/UL/EAC/BSMI
Fan
120mm Sleeve fan
Connector
M/B 20+4 Pin x 1
CPU 4+4 Pin x 1
PCI-e 6 Pin x 1
SATA x 4
4 Pin Peripheral x 3
4 Pin Floppy x 1
Posted by at No comments:

Power Supply Yang Saya Pilih


Posted by at No comments:

Kaedah Pemasangan Power Supply

Langkah 1: Pastikan kelengkapan untuk menaik taraf power supply telah disediakan dan telah dipakai sebelum proses menaik taraf.
a. Power Supply
b. Glove
c. Gelang antistatik
d. Pemutar skru
e. Playar muncung tirus ( jika perlu )
f. Lampu suluh ( jika perlu )

Langkah 2: Pastikan power kabel tidak dipasang atau telah dimatikan pada power supply dan PC supaya tidak berlaku renjatan elektrik sewaktu proses menaik taraf.

Langkah 3: Buka casing dengan menggunakan pemutar skru yang sesuai.


Langkah 4: Setelah buka casing,buang skru power supply yang meletak pada motherboard tersebut dan cabut kabelnya di motherboard ( jika ada ).Kemudian letakkan power supply tersebut di tempat yang lain.

Langkah 5: Gantikan power supply yang ingin ditukar ke tempat yang telah disediakan di dalam casing dan pasang kabel power supply tersebut ke motherboard.


Langkah 6: Tutup semula casing dengan menggunakan pemutar skru yang sesuai.



Langkah 7: Uji power supply tersebut dengan menghidupkan PC.

Posted by at No comments:

Langkah Pengujian Power Supply

Langkah 1:Pasang Kabel Power Ke Power Supply Dan Sambungkan Ke Suis.Kemudian Onkan Suis.

\\\\

Langkah 2: Tekan Button On Atau Kuasa Pada PC

Langkah 3: PC telah dihidupkan dan proses naik taraf Power Supply anda berjaya.TAHNIAH !!!
Posted by at No comments:

Langkah-Langkah Keselamatan

1.Pastikan kabel tidak dipasang pada Power Supply dan PC atau telah dimatikan.
2.Pastikan tangan kering sebelum memulakan proses manaiktarafkan power supply
3.Pastikan memakai peralatan keselamatan seperti glove dan gelang antistatik.
4.Pastikan melakukan proses menaiktarafkan atau penyelenggaraan power supply di bawah pencahayaan dan suhu yang sesuai.
5.Pastikan persekitaran PC tidak mempunyai air dan selamat.
Posted by at No comments:
Subscribe to: Posts (Atom)